How to Fix Huawei Clone R1000 Hang On Logo and LCD Problems with Flash File
If you have a Huawei Clone R1000 smartphone that is stuck on the logo screen or has LCD display issues, you may need to flash it with a new firmware. Flashing is a process of installing a new software on your device, which can solve various problems such as bootloop, virus infection, password lock, etc. In this article, we will show you how to flash your Huawei Clone R1000 with MT6572 Nand flash file using SP Flash Tool.
What is Huawei Clone R1000 Flash File?
Huawei Clone R1000 flash file is a stock ROM or firmware that contains the operating system and other files for your device. It is based on Android 4.4.2 KitKat and has a Mediatek MT6572 chipset. The flash file can be used to restore your device to its original state or to upgrade or downgrade it. The flash file also contains the scatter file, which is a text file that tells the SP Flash Tool how to partition and format your device.
Huawei Clone R1000 Flash File MT6572 Nand Hang On Logo Lcd Fix Firmware
Why Do You Need to Flash Huawei Clone R1000?
There are several reasons why you may need to flash your Huawei Clone R1000 smartphone. Some of them are:
Your device is stuck on the logo screen or bootloop and cannot enter the recovery mode.
Your device has LCD display problems such as flickering, black screen, white screen, etc.
Your device is infected by malware or viruses that cause pop-ups, ads, or unwanted apps.
Your device has forgotten password, pattern lock, pin lock, or FRP lock that prevents you from accessing it.
Your device is running slow, lagging, or crashing frequently.
Your device has unknown baseband, invalid IMEI, or network issues.
You want to update or downgrade your device to a different firmware version.
What Do You Need to Flash Huawei Clone R1000?
Before you flash your Huawei Clone R1000 smartphone, you need to prepare some tools and files. Here are the requirements:
A computer running Windows XP/7/8/10.
A USB cable to connect your device to the computer.
A backup of your personal data such as contacts, messages, photos, etc. Flashing will erase all your data on the device.
A battery charge of at least 50% on your device.
Huawei Clone R1000 flash file (MT6572_NAND_alps__R1000__x5_f18_r1000__4.4.2__Sunshine_FOREIGN_F18_X5_3G_R1000_01_V01_20170711) that you can download from here.
Mediatek USB VCOM drivers that you can download from here.
SP Flash Tool that you can download from here.
How to Flash Huawei Clone R1000 with SP Flash Tool?
After you have downloaded and extracted all the files, you can follow these steps to flash your Huawei Clone R1000 smartphone:
Install the Mediatek USB VCOM drivers on your computer. If you have already installed them, skip this step.
Open the SP Flash Tool folder and run the flash_tool.exe as administrator.
Click on the Scatter-loading button and browse to the folder where you extracted the flash file. Select the MT6572_Android_scatter.txt file and click Open.
The SP Flash Tool will load all the partitions and files for your device. Make sure all the boxes are checked except Preloader and Userdata. Unchecking Preloader will prevent bricking your device and unchecking Userdata will preserve your data.
Click on the Download button at the top of the SP Flash Tool.
Turn off your device and remove the battery if possible. Then connect it to the computer via USB cable while holding the Volume Down or Volume Up button. This will put your device in download mode.
The SP Flash Tool will detect 0efd9a6b88
https://www.alasf.com.br/group/avisos-da-alasf/discussion/e02db86e-95d6-4a02-bcc5-8fc50858bcaf
https://www.juls-fit.ch/group/mysite-231-group/discussion/cf5cda51-b9be-4d21-957c-debfda79cf50